dintok/water & waste water
" />
dintok/water & waste water
" />
Multiparameter portable Conductivity/Dissolved Oxygen meter contains 5 measurement modes. The meter is suitable for measuring the Conductivity, TDS, Salinity, Resistivity and DO of the liquids.
Conductivity/TDS/Salinity/Resistivity Mode:
• Multiparameter portable Conductivity/Dissolved Oxygen meter is equipped with a large backlit LCD display.
• 1 to 5 points push-button calibration with automatic calibration solution recognition.
• Selectable cell constant (0.1/1/10), normalization temperature (20/25°C), TDS conversion factor, seawater and practical salinity measurement modes.
• Linear or pure water compensation improves measurement accuracy of meter.
Dissolved Oxygen Mode:
• 1 or 2 points calibration using the air-saturated water and zero oxygen solution.
•Manual salinity and barometric pressure compensation improve the measurement accuracy.
Other Features:
• Automatic Temperature Compensation provides accurate reading over the entire range.
• Calibration Due Reminder prompts user to calibrate the meter regularly.
• Stability indicator automatically shows current measurement status.
• Auto-Hold function freezes stable measured value for easy viewing and recording.
• Manual temperature calibration corrects temperature deviation.
• Selectable temperature unit (°C or °F) meets different application requirements.
• Help message as a operational guide that helps you quickly begin using the meter.
• System menu allows setting the 13 parameters, including the number of calibration points, resolution, stability condition, measurement unit, etc.
• Reset feature automatically resumes all parameters back to factory default settings.
• Expanded memory stores and recalls up to 500 readings.
• Built-in real-time clock stamps stored data to meet GLP standard.
• Stored data can be transferred into computer by USB communication interface.
• Multi-mode power scheme (battery, power adapter, computer's USB port) ensures that use the meter smoothly.
|
Conductivity |
|
|
Range |
0~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm |
|
Accuracy |
±0.5% F.S |
|
Calibration Points |
1 to 5 points |
|
Calibration Solutions |
10µS/cm, 84µS/cm, 1413µS/cm, 12.88mS/cm, 111.8mS/cm |
|
Temperature Compensation |
0~100°C, 32~212°F, Manual or Automatic |
|
Temperature Coefficient |
0.0~10.0%/°C |
|
Compensation Modes |
Linear or Pure Water |
|
Cell Constant |
K=0.1, 1, 10 or User-defined |
|
Normalization Temperature |
20°C or 25°C |
|
TDS |
|
|
Range |
0~100ppt (Max. 200ppt, depending on factor setting) |
|
Accuracy |
±1% F.S |
|
TDS Factor |
0.1~1.0 (Default 0.5) |
|
Salinity |
|
|
Range |
0~10ppt (Max. 80ppt) |
|
Accuracy |
±1% F.S |
|
Measurement Modes |
Seawater or Practical Salinity |
|
Resistivity |
|
|
Range |
0~100MΩ |
|
Accuracy |
±1% F.S |
|
Resolution |
0.01, 0.1, 1 |
|
Dissolved Oxygen |
|
|
Range |
0.00~20.00mg/L (or ppm) |
|
Accuracy |
±0.2mg/L |
|
Resolution |
0.01mg/L |
|
Calibration Points |
1 or 2 points |
|
Temperature Compensation |
0~50°C, 32~122°F, Automatic |
|
Pressure Correction |
60.0~112.5kPa, 450~850mmHg |
|
Salinity Correction |
0~50g/L |
|
Saturation of Oxygen |
|
|
Range |
0.0~200.0% |
|
Accuracy |
±2.0% |
|
Resolution |
0.1, 1% |
|
Temperature |
|
|
Range |
0~105°C, 32~221°F |
|
Accuracy |
±0.5°C, ±0.9°F |
|
Resolution |
0.1°C |
|
Calibration Points |
1 point |
|
Calibration Range |
Measured value ±10°C |
|
Others |
|
|
Hold Function |
Manual or Automatic |
|
Stability Conditions |
Low or High |
|
Calibration Due |
0 to 31 days |
|
Power Off |
Manual or Automatic (10, 20, 30 minutes) |
|
Reset Function |
Yes |
|
Memory |
Stores up to 500 data sets |
|
Output |
USB Communication Interface |
|
Connector |
6-pin Mini Plug |
|
Power Requirements |
3×1.5V "AA" Batteries |
|
Battery Life |
Approximately 150 hours (Turn off the backlit) |
|
Dimensions |
170(L)×85(W)×30(H)mm |
|
Weight |
300g |
بررسی و خرید
Comment :